Fuel Cell Venting 101: Stop the Gas Smell in Custom Builds
Fuel cells are a popular choice for hot rods, race cars, off-road rigs and custom builds. They are strong, flexible to package and available in almost any size. They also need to vent, and that vent is often the source of a strong gas smell.
Why fuel cells need venting
Like any fuel tank, a fuel cell has to breathe. As fuel warms, it gives off vapor and builds pressure. As it cools, the cell needs to draw air back in. Most fuel cells use a vent fitting with a rollover valve and a line that routes to the outside.
Without vapor control, that vent line releases fuel vapor wherever it ends. In a trunk-mounted cell, that can mean fuel smell inside the car. In a garage or trailer, it can mean fumes everywhere.
Safe venting basics
Every fuel cell installation should follow the manufacturer's instructions. Some general good practices:
Use the correct rollover or check valve for your cell
Route vent lines up and away from heat sources
Avoid kinks, sharp bends and low spots where fuel can collect
Secure lines so they cannot chafe or come loose
Inspect fittings and lines regularly for leaks
Adding a charcoal vapor canister
Vapor Trapper is a billet aluminum charcoal vapor canister that installs in line with the vent hose. Fuel vapor passes through activated charcoal, which captures it before it escapes. Its universal design works with practically any inlet and outlet configuration, which makes it a great match for the wide variety of fuel cell setups out there.
For tight trunk and chassis packaging, the Low-Profile Vapor Trapper offers the same performance in a slimmer design.
Built to match your build
Vapor Trapper is machined from 6061 billet aluminum, made in Arizona, rechargeable and backed by a lifetime warranty.
Clean up your cell
If your fuel cell build smells like gas, fix the vent. Shop Vapor Trapper at vaportrapper.com.
.jpg)








Comments