Zip Kit Magnetic Mounts: No-Drill Vent Line Routing Made Easy

A clean Vapor Trapper install depends on more than the canister. How you route and secure your vent line makes a big difference in how the finished job looks and how well it holds up. That is where the Zip Kit comes in.

What is the Zip Kit?

The Zip Kit is a set of magnetic zip tie mounts made for vent line routing. Instead of drilling holes in your floor pan, frame or firewall to secure your lines, the magnetic mounts attach to steel surfaces and give you a solid anchor point for zip ties.

Why no-drill matters

On a classic car, every hole counts. Drilling into original sheet metal can be a big deal on a restored car, and extra holes can lead to rust down the road. On a show car, they are just one more thing you will want to hide.

Magnetic mounts let you:

• Route vent lines cleanly without permanent modifications

• Adjust your routing until it looks exactly right

• Keep original metal untouched

• Move or remove mounts later if you change your setup

A natural partner for Vapor Trapper

Vapor Trapper installs in line with your fuel tank vent hose. That means the vent line has to run from the tank to the canister and then on to wherever it exits. Keeping that line tidy and secure is part of a professional install. The Zip Kit makes it easier to get there.

Good practice for vent line routing

A few tips for any vent line install:

• Keep lines away from exhaust components and other heat sources

• Avoid sharp bends and kinks that restrict flow

• Secure lines so they do not rub or chafe against metal edges

• Inspect your routing after the first few drives

Add it to your order

The Zip Kit is an easy add-on to any Vapor Trapper install, whether you are running the Basic package, Premium package or a Low-Profile unit.

Shop the Zip Kit and the full Vapor Trapper lineup at vaportrapper.com.