top of page

SEARCH RESULTS

Search this site

76 results found with an empty search

  • Winter Storage Tips: Keep Your Classic From Filling the Garage With Gas Fumes

    As the driving season winds down in much of the country, a lot of classic cars are headed into winter storage. Months of sitting can mean months of fuel smell in your garage if you do not plan ahead. Why stored cars smell like gas Even in cooler weather, temperatures in a garage rise and fall every day. Each swing makes the fuel tank breathe. On a classic car with a tank that vents to the atmosphere, that means vapor escaping into the garage day after day, all winter long. If your garage is attached to your house, that smell can find its way inside. Storage checklist A few smart steps before you put the car away: Inspect for leaks. Check fuel lines, the tank, the sending unit and the carburetor or fuel rail. Replace any cracked or soft rubber hoses. Follow a fuel plan. Many owners use a fuel stabilizer and follow their preferred approach to tank level for storage. Check the recommendations for your specific vehicle. Clean and dry the car. Moisture and dirt are not your friends in storage. Use a breathable car cover. Plastic covers can trap moisture. Address the vent. Uncontrolled tank vent vapor is one of the most common sources of gas smell in a garage. Controlling vapor during storage Vapor Trapper is a billet aluminum charcoal vapor canister that installs in line with your fuel tank vent hose. Vapor passes through activated charcoal and is captured before it can escape into your garage. It keeps working while the car sits, which makes it a great upgrade before storage season. The charcoal is rechargeable, typically lasting 5 to 7 years before it needs to be refreshed, and every unit is backed by a lifetime warranty. Start next season fresh Install Vapor Trapper now and you will be glad you did every time you walk into the garage this winter. Shop at vaportrapper.com.

  • Dirty Humor: Pot O' Gold Kustoms' SEMA 2026 Build

    Some builds are about restoring what was. Others are about pushing what a car can be. Pot O' Gold Kustoms builds the second kind, and their latest project, Dirty Humor, is headed to SEMA 2026. A builder partnership Pot O' Gold Kustoms is one of Vapor Trapper's builder partners. They build with Vapor Trapper integrated into their projects from the start, rather than adding vapor control at the end. That approach lets the canister and vent routing become part of the overall design. Prepped for SEMA and Battle of the Builders Dirty Humor has been prepped for the 2026 SEMA Show and for the SEMA Battle of the Builders Presented by Mothers. Battle of the Builders vehicles face some of the toughest judging in the industry, where every detail of a build gets a close look. Why builders integrate vapor control On a high-end custom build, details matter. A gas smell at a show, in a trailer or in a client's garage can take away from months of work. Integrating Vapor Trapper from the start means: Clean, planned vent line routing A billet aluminum canister that matches the quality of the build A universal design that adapts to custom tanks and fuel cells A Low-Profile option when space is tight A lifetime warranty the builder can pass on to the owner See it in Las Vegas SEMA 2026 runs November 3 through 6 at the Las Vegas Convention Center. Watch for Dirty Humor and the other builds running Vapor Trapper, and stop by the Vapor Trapper display to see the full lineup. Builders and shops If you are a builder interested in integrating Vapor Trapper into your projects, we would love to talk. Visit our dealer page or contact us at vaportrapper.com.

  • Classic Ford Truck Gas Smell: Stopping Fuel Vapor in F-100s and Early F-Series

    Classic Ford trucks are everywhere at car shows, and for good reason. Early F-100s and F-Series pickups are simple, tough and full of character. Many of them also share a common problem: a gas smell that never seems to go away. In-cab tanks and the smell inside Many early Ford trucks were built with the fuel tank mounted inside the cab, behind the seat. That design puts the tank and its vent much closer to you than on a car. When fuel warms up and vapor escapes, you smell it right in the cab. Even trucks with relocated or aftermarket tanks often still vent straight to the atmosphere, which means fumes in the garage every time the truck sits. Rule out leaks Start with a full inspection. Look at the tank seams, sending unit gasket, filler neck, fuel lines and clamps. In-cab tanks deserve extra attention because a leak there is in your living space. If you find any wetness or damage, repair it before driving. Trap vapor at the vent Once you know the system is dry, the next step is controlling vapor from the tank vent. Vapor Trapper is a billet aluminum charcoal vapor canister that installs in line with the vent hose. Fuel vapor passes through activated charcoal and is captured before it reaches the cab or garage. For classic Ford truck owners, Vapor Trapper offers: A universal design for stock, relocated and aftermarket tanks Compatibility with fuel cells and EFI conversions 6061 billet aluminum construction that fits a quality restoration A Low-Profile option for tight spaces Rechargeable charcoal and a lifetime warranty Shop truck, show truck or daily Whether your F-100 is a weekend cruiser or a full custom, it should be enjoyable to drive and park. Stop living with the gas smell. Shop Vapor Trapper at vaportrapper.com.

  • How Does a Charcoal Vapor Canister Work? A Simple Explanation

    If you have spent any time researching gas smell in classic cars, you have probably seen the term charcoal canister. Here is a simple explanation of what it is and why it works. The problem: tanks have to breathe A fuel tank cannot be completely sealed. As fuel warms up, it expands and gives off vapor, which builds pressure. As it cools, the tank needs to pull air back in. That is why fuel tanks have a vent. On most classic cars, that vent goes straight to the outside air. Every time the tank breathes out, gasoline vapor goes with it. The solution: activated charcoal Activated charcoal is charcoal that has been processed to have an enormous amount of surface area packed into a small space. That surface is very good at grabbing and holding hydrocarbon molecules, like the ones in gasoline vapor. When you put activated charcoal in line with a fuel tank vent, the vapor has to pass through it. The charcoal holds onto the fuel vapor, and much cleaner air comes out the other side. The tank can still breathe, but the gas smell stays trapped. Why modern cars don't smell like gas Every modern car uses this principle. A charcoal canister collects tank vapor, and the engine management system purges it into the engine to be burned. That is a big part of why a new car parked in your garage does not make it smell like fuel. Bringing it to classic cars Most classic cars, hot rods and custom builds never had this system, or it was removed long ago. Vapor Trapper was designed to fill that gap. Vapor Trapper is a patented billet aluminum charcoal vapor canister that installs in line with your fuel tank vent hose. It is universal, so it works with practically any inlet and outlet configuration, and it is used on cars, trucks, hot rods and boats. When the charcoal eventually becomes saturated, typically after 5 to 7 years, you replace the charcoal and keep the canister. It is made in Arizona and backed by a lifetime warranty. Learn more at vaportrapper.com.

  • One Week to SEMA 2026: What to Expect from Vapor Trapper

    SEMA 2026 is one week away. The show opens November 3 at the Las Vegas Convention Center and runs through November 6. Here is a quick look at what Vapor Trapper has planned. A full island display We are bringing our biggest display yet. Our island will feature the complete Vapor Trapper product line along with customer and partner vehicles, including classic VWs, hot rods, trucks and custom builds. It is a chance to see how Vapor Trapper looks and fits on a wide range of real vehicles. New products and configurations Our 2026 lineup adds Low-Profile and High Performance configurations, plus new installation solutions and accessories. If you have been waiting to see the new options in person, this is the place. Air-cooled Beetles across the show Air-cooled VWs will be well represented at SEMA this year, including in the North Hall area. One featured project is the Rally 64, a 1964 Beetle built into a rally-inspired car in 90 days. Battle of the Builders Vapor Trapper will be on vehicles competing in the 2026 SEMA Battle of the Builders Presented by Mothers, including builds from our partners at Pot O' Gold Kustoms. The first Vapor Trapper Awards We will be recognizing select standout Vapor Trapper installations on vehicles displayed at the show. If your vehicle will be at SEMA running a Vapor Trapper, submit it at vaportrapper.com/sema-awards. For shops and dealers SEMA is a trade show, and we love meeting the shops and retailers who help get Vapor Trapper into more vehicles. If you are interested in carrying Vapor Trapper, stop by or apply through the dealer page on our website. See you in Vegas Come find the Vapor Trapper display, check out the builds and talk with our team about your project. Not going? Follow along on our blog and social channels, and shop anytime at vaportrapper.com.

  • Why Does My Chevelle Smell Like Gas? A Muscle Car Owner's Guide

    There is nothing like walking into the garage and seeing a Chevelle sitting there. What you do not want is to be hit with a cloud of gasoline smell every time you open the door. The usual causes Gas smell in a Chevelle, or almost any classic muscle car, usually comes down to two things: a leak, or fuel vapor escaping from the tank vent. Leaks can come from: Aging rubber fuel hoses A worn sending unit gasket A loose or cracked filler neck connection A carburetor that is overflowing or leaking at the base If you see or smell liquid fuel, fix it before driving the car again. Tank vapor: the smell that won't go away If everything is dry, the smell is probably vapor. Muscle cars of this era vent their fuel tanks to the atmosphere. When the fuel warms up during the day, or the car is parked after a drive, vapor pushes out through the vent. In a closed garage, it builds up overnight. High-performance fuel, warm garages and long periods of sitting can all make the smell stronger. A modern solution with the right look Vapor Trapper is a billet aluminum charcoal vapor canister that installs in line with your fuel tank vent hose. Activated charcoal inside captures fuel vapor before it escapes. The machined 6061 billet aluminum body looks right at home on a muscle car, whether it is a numbers-matching restoration or a pro-touring build. Chevelle owners like that Vapor Trapper: Works with stock tanks, aftermarket tanks and fuel cells Works with carbureted and EFI setups Has rechargeable charcoal, so it does not need to be replaced Is made in Arizona and backed by a lifetime warranty Keep the muscle, lose the smell Your Chevelle should make the neighbors jealous, not make your family complain about the garage. Stop living with the gas smell. Shop Vapor Trapper at vaportrapper.com.

  • Zip Kit Magnetic Mounts: No-Drill Vent Line Routing Made Easy

    A clean Vapor Trapper install depends on more than the canister. How you route and secure your vent line makes a big difference in how the finished job looks and how well it holds up. That is where the Zip Kit comes in. What is the Zip Kit? The Zip Kit is a set of magnetic zip tie mounts made for vent line routing. Instead of drilling holes in your floor pan, frame or firewall to secure your lines, the magnetic mounts attach to steel surfaces and give you a solid anchor point for zip ties. Why no-drill matters On a classic car, every hole counts. Drilling into original sheet metal can be a big deal on a restored car, and extra holes can lead to rust down the road. On a show car, they are just one more thing you will want to hide. Magnetic mounts let you: Route vent lines cleanly without permanent modifications Adjust your routing until it looks exactly right Keep original metal untouched Move or remove mounts later if you change your setup A natural partner for Vapor Trapper Vapor Trapper installs in line with your fuel tank vent hose. That means the vent line has to run from the tank to the canister and then on to wherever it exits. Keeping that line tidy and secure is part of a professional install. The Zip Kit makes it easier to get there. Good practice for vent line routing A few tips for any vent line install: Keep lines away from exhaust components and other heat sources Avoid sharp bends and kinks that restrict flow Secure lines so they do not rub or chafe against metal edges Inspect your routing after the first few drives Add it to your order The Zip Kit is an easy add-on to any Vapor Trapper install, whether you are running the Basic package, Premium package or a Low-Profile unit. Shop the Zip Kit and the full Vapor Trapper lineup at vaportrapper.com.

  • Battle of the Builders 2026: Vapor Trapper on the SEMA Stage

    The SEMA Battle of the Builders Presented by Mothers is one of the most watched competitions in the custom car world. Every year, top builders bring their best work to Las Vegas to be judged against the very best in the industry. This year, Vapor Trapper will be on vehicles competing in the 2026 SEMA Battle of the Builders. Why that matters to us Battle of the Builders vehicles are judged on every detail. Fit, finish, engineering and craftsmanship all count. When builders at that level choose to run Vapor Trapper, it tells us we are building a product that belongs on the best cars in the world. It also shows something we have always believed: vapor control does not have to be an afterthought. A clean, billet aluminum canister can be part of the design, not something hidden under a panel. Built with Pot O' Gold Kustoms One of our builder partners, Pot O' Gold Kustoms, builds with Vapor Trapper integrated from the start. Their project, Dirty Humor, is prepped for SEMA 2026 and Battle of the Builders. We will share more about that build soon. What builders get from Vapor Trapper For shops building competition-level cars, Vapor Trapper checks a lot of boxes: 6061 billet aluminum that matches high-end builds Patented, universal design for practically any inlet and outlet configuration Works with EFI, fuel cells and custom tanks Low-Profile option for tight packaging Rechargeable charcoal and a lifetime warranty Follow along SEMA runs November 3 through 6 at the Las Vegas Convention Center. Keep an eye on our blog and social channels for updates from the show floor, including the builds running Vapor Trapper and our new Vapor Trapper Awards. Building something for next year? Talk to us about integrating Vapor Trapper into your project. Learn more at vaportrapper.com.

  • Gas Smell After an EFI Conversion? Why It Happens and How to Fix It

    Fuel injection conversions are one of the most popular upgrades for classic cars and trucks. Better starting, smoother running and improved drivability are all great reasons to make the switch. But a lot of owners notice something unexpected afterward: the car still smells like gas, or even smells worse. Why EFI doesn't automatically fix gas smell An EFI system changes how fuel is delivered to the engine. It does not change how your fuel tank vents. If your tank vents to the atmosphere, fuel vapor still escapes every time the fuel warms up, whether you are running a carburetor or injection. Many EFI conversions also add a return line and an in-tank or external pump. That means more fuel moving through the system, more heat going back into the tank, and sometimes more vapor. Check every new fitting EFI systems run at much higher fuel pressure than carbureted systems. A fitting that would never leak at carburetor pressure can weep under EFI pressure. After any conversion, inspect every fitting, line and connection, especially at the pump, filter, regulator and fuel rail. Fix any leak immediately. Controlling vent vapor on an EFI build If the system is tight and you still smell gas, the source is probably the tank vent. Vapor Trapper is a billet aluminum charcoal vapor canister that installs in line with the fuel tank vent hose. It captures vapor in activated charcoal before it can escape. Vapor Trapper works with EFI systems, fuel cells and custom builds. Its universal design handles practically any inlet and outlet configuration, so it adapts to whatever tank and vent setup your conversion uses. Pair performance with comfort You did the conversion to make your car better to drive. Getting rid of the gas smell makes it better to live with. Add rechargeable charcoal, 6061 billet aluminum construction and a lifetime warranty, and Vapor Trapper becomes one more upgrade you install once and stop thinking about. Shop Vapor Trapper at vaportrapper.com.

  • Chevy C10 Smells Like Gas? Here's the Vapor Fix

    Square bodies, Action Line trucks and early C10s are some of the most popular classic trucks on the road. They are also known for something owners don't brag about: gas smell. Why C10s are prone to gas smell Depending on the year, C10 fuel tanks were mounted in different spots, including behind the seat in the cab on some models. Many of these trucks also have aftermarket tanks, relocated tanks or fuel cells installed during restoration. In almost every case, the tank vents to the atmosphere. When fuel warms up, it expands and pushes vapor out through the vent. In a shop or garage, that vapor collects. In trucks with a cab-mounted tank, it can come right into the cab with you. First: make sure it isn't a leak Inspect the tank, sending unit gasket, filler neck, rubber lines and clamps. Old rubber hoses are a common cause of fuel smell on older trucks. If you find wet spots or soft, cracked hoses, replace them first. A liquid fuel leak is a fire hazard. The upgrade most C10s are missing Modern trucks control tank vapor with a charcoal canister. Vapor Trapper brings that same idea to classic trucks with a billet aluminum canister that installs in line with your fuel tank vent hose. Vapor passes through activated charcoal, which captures it before it reaches your shop or cab. Why it works for C10 builds: Universal design that works with stock, relocated and aftermarket tanks Compatible with fuel cells and EFI conversions Clean 6061 billet aluminum look that fits a restored or custom truck Rechargeable charcoal and a lifetime warranty Tight on space? If you are running a bagged or lowered C10 with limited clearance, the Low-Profile Vapor Trapper offers the same vapor control in a slimmer design. Drive it, park it, enjoy it Your truck should be something you are excited to walk into the garage to see. Stop living with the gas smell. Shop Vapor Trapper at vaportrapper.com.

  • Basic vs. Premium Install Package: Which Vapor Trapper Kit Is Right for You?

    Once you decide to get rid of the gas smell, the next question is which kit to buy. Vapor Trapper offers two complete packages: the Basic Install Package and the Premium Install Package. Here is how to think about the choice. Both packages start with the same core Every Vapor Trapper install package is built around our patented billet aluminum charcoal vapor canister. No matter which package you choose, you get: A 6061 billet aluminum canister made and assembled in Arizona A universal design that works with practically any inlet and outlet configuration Rechargeable charcoal, typically good for 5 to 7 years before it needs a refresh Our lifetime warranty The Basic Install Package The Basic package is a great fit for builders who already have a plan for mounting and plumbing. If you are comfortable sourcing a few of your own fittings or you already have a clean spot picked out on your vent line, the Basic package gives you what you need to get the job done. The Premium Install Package The Premium package is our best seller for a reason. It is designed to make the install as complete and straightforward as possible, with more of the pieces you need included in the box. If you want an all-in-one solution or you are installing for a customer, Premium is usually the easier path. How to choose Ask yourself a few questions: Do you want everything in one box, or do you prefer to source some parts yourself? How much room do you have around your vent line? Is this going on a show car where every detail matters? If you are short on space, consider the Low-Profile Vapor Trapper. And for no-drill vent line mounting, add the Zip Kit magnetic mounts. Still not sure? Check the full package contents on each product page, or give our tech line a call. We are happy to talk through your build and help you pick the right setup. Shop install packages at vaportrapper.com.

  • Introducing the Vapor Trapper Awards at SEMA 2026

    At SEMA 2026, we are doing something new. For the first time, Vapor Trapper will present the Vapor Trapper Awards, recognizing standout Vapor Trapper installations on vehicles displayed at the show. Celebrating the builders Our products are only as good as the builds they go into. Over the past few years, we have seen Vapor Trapper installed in everything from classic Beetles to hot rods, trucks and full custom builds. Some installs are so clean you have to look twice to find the canister. Others put it front and center as part of the design. The Vapor Trapper Awards are our way of recognizing the shops and owners who take vapor control seriously and make it look great. How it works We will be recognizing select outstanding Vapor Trapper installations on vehicles displayed at the 2026 SEMA Show, November 3 through 6 at the Las Vegas Convention Center. If your vehicle will be at SEMA and is running a Vapor Trapper, we want to hear about it. Entries are collected through our awards page at vaportrapper.com/sema-awards. What we're looking for We love installs that show real thought and craftsmanship, such as: Clean routing of vent lines Smart mounting that fits the character of the build Creative use of the Low-Profile or standard canister Builds that solve a real gas smell problem Part of a bigger SEMA program The awards are part of our larger SEMA 2026 program, which includes a large island display featuring our full product line along with customer and partner vehicles. Enter your build If your car, truck or custom build will be on the SEMA floor with a Vapor Trapper installed, head to vaportrapper.com/sema-awards and tell us about it. We can't wait to see what you've built.

bottom of page